4 Worksite Safety Tips to Reduce Accidents and Injuries

Worksite safety is a top priority for professionals across a variety of industries for good reason. In 2019 alone, on-the-job injuries ended up costing over $170 billion according to the National Safety Council.

Of course, the real cost of worksite injuries can be difficult to calculate since it’s nearly impossible to put a figure on the cost of pain, suffering and the loss of life. While the consequences of poor worksite safety are staggering, the good news is that you can prevent accidents and injuries by following some simple safety tips, including:

1. Wear Proper Protective Gear

Protective gear differs by industry, but utilizing the right gear for the job can make a big difference in keeping workers safe. For example, when working with epoxy anchors for concrete, masks and eye protection are a must to avoid irritants causing injuries to eyes and airways.

Likewise, slip-resistant shoes are often needed when working on surfaces that are slick or uneven. You may also need to use protective gear made from certain materials to protect against contamination.

When using protective gear, make sure it is inspected and equipped prior to stepping foot on a site to avoid finding a problem after an injury has already occurred.

2. Read Your Material Safety Data Sheets

While the right gear can provide protection on a worksite, knowledge also has the power to prevent injuries. On any job site that requires the use of potentially hazardous chemicals, the Occupational Health and Safety Administration (OSHA) requires that Material Safety Data Sheet (MSDS) information is provided for each product used.

An MSDS for products like HY200 epoxy anchors will list the names of the chemicals used in the epoxy along with hazard identification information. Reviewing the MSDS of each chemical product used can reduce the chances for accidents and injuries due to misuse.

3. Review Your Worksite Safety Manual

If you work in construction, labor or a related industry, your employer has probably provided you with a worksite safety manual. This manual is used to provide standard operating procedures for handling workplace safety, and it can be invaluable to reduce accidents and injuries.

While you may have one manual provided by your employer that covers safety protocols across all job sites, you may also be provided with individual manuals that pertain to specific worksites. It would be a good idea to review the general manual as well as any manual specific to your current worksite. This should be done prior to getting started on a job to understand the risks of the site and to learn about safety measures required to avoid injuries.

Your manual should also provide chain-of-command and point-of-contact information to get help quickly in the event of an accident. Following the manual can not only save lives, but it can also potentially reduce your liability if an injury occurs.

4. Report Safety Hazards

You can also take proactive steps to reduce the chance for injury accidents on a work site by reporting hazards as soon as you come across them. Keep in mind that construction worksites are often very busy, meaning some hazards may slip through the cracks after a site inspection. Taking it upon yourself to report safety hazards can protect everyone involved in a project.

In addition to reporting hazards, don’t hesitate to report unsafe behavior that others may be engaged in. If you see a co-worker haphazardly mixing chemicals like A7+ epoxy anchors or AC 100 epoxy products, let your supervisor know. Not only can these types of incidents lead to injuries, but they can also cause damage to the project as a whole.

A Safer Worksite is a Productive Worksite

No matter what role you have on a worksite, everyone needs to do their part to keep things safe. A safe work environment is a productive work environment as accidents and injuries can take hard workers off the job and cause delays in finishing projects.

By taking a little bit of time to ensure your own safety, you can also keep others safe and keep things running on schedule and on budget.